Euphonix ML530 Instruction Manual download pdf (Page 46)

System 5 Digital Audio Mixing System Operation Manual eMix Application

When entering an analog studio, the patchbay is wired to all the equipment supplied

with the room. The multitrack is normalled to the console line inputs, the mics to the

console mic inputs, and the outboard gear is ready to be patched into channels.

System 5 must be initially set up so all studio equipment comes up on the PatchNet

screen and is correctly labelled and normalled ready for a session. This basic wiring in-

formation is stored in the Title Default so these settings can be used when starting a new

session with a new Title. To set up System 5 studio wiring and set the Title Default, see

Title Defaults on page 42.

Enter PatchNet by clicking the PatchNet tab at the bottom of the eMix screen. PatchNet

has four categories: Console I/O, Device Inputs, Device Outputs, and Cabling.

4.2.1 Console I/O

Click Console I/O on the upper-left of the PatchNet window, then click A and B Inputs

from the sub-categories below it (Figure 4-9). Click in the Name field and type a name

for a channel. This is where connections to the channel’s A and B inputs are made.

Figure 4-9 Console I/O A and B inputs Window

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 213 214

No comments

Euphonix ML530 Instruction Manual Page 46