Euphonix MADI MI715 Specifications Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
S5 Fusion Digital Audio Mixing System - InDepth
14
Number of Buses - Mixer Models
The number of Mix, Group and Aux buses available in a S5 Fu-
sion console is dependent on the number of DSP cards and the
selected Mixer Model. A second DSP card may be added at any
time to increase the number of channels.
Bus Processing
ThenewDSPcardssupportupto8dedicatedbusprocessors
comprising filters and dynamics that can be attached to any mix,
group or aux bus and controlled from a Strip.
Mix Buses
Upto32mixbusesareavailable,conguredinSections(Stems)to
allow mixing to different formats. For example, a stereo mix section
hastwoindividualbusesanda5.1mixsectionhassix.Upto16
mix sections may be simply configured from the eMix setup soft-
ware and each may be given a name. S5 Fusion supports up to 32
individualmixbuses.FormatsareMono,Stereo,LCRS,5.1,6.1and
7.1pluscustomformats.RoutingasourcetoaMixSectionisdone
fromtheswitchesontheKnobsetafterrstpressingtheRoute-Mix
key.JustaswiththeAuxsends,asshownright,eachOn/Offkey
switches the signal to that bus section. The channel signal may be
routed to all buses in that section with or without the pan inserted.
Itisalsopossibletoroutetoindividualbuses(directassign)ineach
section, for example, just the center bus of a 5.1 mix section.
Group Buses
Upto24audiogroup/DAWsendbusesareavailable.Theycanbe
settoformatsfrommonothru7.1.RoutingissimilartoMixbuses
bypressingtheRoute-GroupkeythenusingtheknobsetOn/Off
switches. For traditional sub-group control these buses may be
brought back into channels that can act as audio sub-group masters
- note that dedicated bus processing is also available. The Group
knobsets also include an overall group send level control.
Aux Send
Upto16Auxsendsareavailableandcanbeconguredinmono
or stereo pairs. Press the Aux function key to bring up the Aux
sends on the knobset. The example on the right shows typical
Aux sends with 1 & 2 working as a stereo send with pan. Sends
can be individually set to feed pre or post-fader and can be used
as effects sends or foldback sends. Aux masters are controlled
from the center section and include individual talkback and tone
insert provisions. Each send may be named to reflect its destina-
tion. Aux sends can be flipped to be controlled from the faders
- very useful for setting complex monitor mixes and sends.
Aux Select
Clear
(Aux1&2aresetupasstereo)
Aux 1 & 2 Pan
PanIn/Out
Pre/Post
Aux1&2Level
Aux1&2On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Pre/Post
Aux 3 Gain
Aux3On/Off
Aux Page To Additional Sends
AuxKnobsetSelect
Group and Mix Routing
KnobsetSelect
Bus Routing and Aux Sends
BUSES & ROUTING
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments