Euphonix MADI MI715 Specifications download pdf (Page 16)

S5 Fusion Digital Audio Mixing System - InDepth

Meters

The meters above each strip may be set to show any source,

Mix, Group or Aux bus. Single or dual meters can be select-

ed. For example, all strips could have the source fader signal

plustherst24stripscouldalsoshowthemixbuslevels.

The example shown to the right has been conﬁgured with a

singleinput meterdisplaying thesource signal(channel 1)

and a dynamics meter.

Themeterisaccuratetowithin1/4dBfrom0dBfsdownto

48dBfsanddisplaysclipindication.Thegreenbartotheleft

of the meter lights showing the approach to peak level.

If the strip is set to a Multi-Format Master that has stereo

or surround format then the meter at the top of the strip will

show stereo or 5.1 metering.

It is also possible to set up the channel meters so that they

display metering for both the Main and Swap sources at the

same time.

Meter Presets

Meter presets allow the setup of meter combinations to

bestoredandnamedforlaterrecall-24areavailable.One

setup could contain primary source meters together with mix

bus signals, another Aux sends.

EQ / Dynamics / Pan Display

WheneverEQ,Dynamics,andPanarebeingcontrolledonthe

knobset, a graphical display illustrates what is happening to

the audio.

Channel Routing Display

Source routing to the mix and group buses are also displayed

on the screen.

High Resolution Meter

Dynamics Meter

Source Designation

Channel Number

EQCurve

(dynamics&pancurvesshow

whentheirknobsetsareselected)

Bus Routing Indication

Button Designation

(forthetwobuttonsattopofthestrip)

Screen at the top of 8 strips showing 8 channel meters

METERS

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Euphonix MADI MI715 Specifications Page 16