Euphonix R-1 Remote User Manual download pdf (Page 13)

Remote Manual Page 13

Stand Height and Angle Adjustments

The Remote Stand features 2 height and 1 angle adjustments, allowing

comfortable positioning of the Remote worksurface.

1) The upper section of the Remote has six inches of vertical adjustment. This

places the worksurface from 30.7” to 36.7” above ground.

• Loosen the lever on the side of the Remote pillar to raise or lower the

entire upper section. Pneumatic assist is provided to ease the raising

of the upper section.

• Tighten the lever to keep this height adjustment.

2) The angle of the Remote head is adjustable through a sweep of 10%, down

from horizontal.

• Loosen the lever at the top of the Remote pillar to adjust the angle of

the Remote head.

• Tighten the lever to keep this angle adjustment.

3) The monitor shelf Is designed to carry a 15” TFT style video monitor. The

shelf is attached to the back of the Remote pillar on a mounting bracket with

two screws. Six screw holes are provided, allowing for 4 mounting positions

in a range of 3” vertical.

• Use the included Velcro strips to attach the monitor to the monitor

shelf.

10"

Monitor Shelf

6” Adjustable

Height

Angle Adjustment

Lever

1 2 ... 8 9 10 11 12 13 14

No comments

Euphonix R-1 Remote User Manual Page 13