Euphonix R-1 Remote User Manual

R-1 Remote ManualVersion 2.0Part# 840-06268-02 rev BPublish date: Jan 2001Euphonix Inc. 220 Portage Avenue Palo Alto , CA 94306Tel: (650)855-0400

Remote Manual Page 10©1999 Euphonix, Inc.User ReferenceRS-422 to RS-232 ConverterRS-232RS-422K422-99KSYSTEMSConnect directly to thePilot Computer port

Remote Manual Page 11©1999 Euphonix, Inc.KVM Extender Hookup InstructionsTOOLS REQUIRED: ¼” Allen Hex WrenchPROCEDURE:Cabling at Remote Stand• Route

Remote Manual Page 12©1999 Euphonix, Inc.KVM Extender Hookup DiagramTransmitterRemote Extender WireTray (in Stand base)Pilot ComputerTFTSCSI|O|O|Input

Remote Manual Page 13©1999 Euphonix, Inc.Stand Height and Angle AdjustmentsThe Remote Stand features 2 height and 1 angle adjustments, allowingcomfort

Remote Manual Page 14©1999 Euphonix, Inc.Power On SequenceThe Remote can be powered up at any time during the R-1 power on sequence. Allthe keys will

Remote Manual Page 2©1999 Euphonix, Inc.TABLE OF CONTENTSR-1 REMOTE...

Remote Manual Page 3©1999 Euphonix, Inc.R-1 REMOTEOverviewPurposeThe R-1 Remote is the dedicated control unit for the R-1 Multitrack Recorder. Thelay

Remote Manual Page 4©1999 Euphonix, Inc.There are 2 RS-422 connectors on the back of each Remote, allowing daisychaining in installations where up to

Remote Manual Page 5©1999 Euphonix, Inc.Physical SpecificationsDimensions - RemoteHeight: 8.6 inchesWidth: 16.5 inchesDepth: 2.5 inches includ

Remote Manual Page 6©1999 Euphonix, Inc.Dimensions – StandHeight: 30.7"-36.7" adjustableWidth: 21.5 inchesDepth: 24”Weight: 60 lbs

Remote Manual Page 7©1999 Euphonix, Inc.Rear Panel Connectors – Remote HeadRS-422 Out (9 pin Dsub) The output of this connector is fed to the Pilot c

Remote Manual Page 8©1999 Euphonix, Inc.Rear Panel Connectors – Stand BaseMonitor (15 pin Dsub) The video monitor connection from the Pilot computer

Remote Manual Page 9©1999 Euphonix, Inc.Technical SpecificationsPower Requirements110, 220, or 240 VAC at 50 or 60 HzEnvironmental Requirements5 to 35