Euphonix ML530 User Manual download pdf (Page 8)

Rear Panel Connectors

Inputs (38 pin ELCO). A total of 24 inputs are provided on two 38 pin ELCO connectors. All signals

input at these ports can be level boosted or attenuated. In standard configuration, input cable is

configured by customer. ELCO connectors and pins are provided. (See pinouts on pages 14

and 15.)

Outputs (38 pin ELCO) A total of 24 outputs are provided on two 38 pin ELCO connectors. The supplied

output cables fan out to 2 sets of 12 XLR Females for connection to the AM713 Analog to MADI

converter. (See pinouts on pages 14 and 15.)

Control (DB15) Digital control input from 253i Pilot computer. Signal format is Euphonix TCC bi-

directional serial protocol.

AC Line In (IEC) and Fuse Tray The IEC power connector accepts standard IEC power cords. 90-250VAC,

50 or 60Hz can be applied at this connector.

Dimensions

Height: 3.5 inches

Width: 19 inches

Depth: 18.6 inches

Weight: 17 lbs

Approximately 6 inches of depth should be left behind the ML530 for cable connections.

CONTROL

OUTPUTS INPUTS

1 -12

13-24

ML530

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

No comments

Euphonix ML530 User Manual Page 8