Euphonix Modular I/O Instruction Manual download pdf (Page 16)

Euphonix Modular I/O Configuration Guide Product Description

TCP/IP (RJ45), CAN Remote (RJ45) no longer used, RS232

(9pin DSub) for ip address configuration, ~300 mA, 4HP,

~200g.

1.2.7 WC984 4ch WCLK Out

General Description

The WC984 provides four workclock outputs derived from

the frame’s sync buss, regardless of the module being used

as the master sync source. Sample rates from 44.1k ~ 96k

are supported. This module is highly recommended from

frames where sync-to-MADI is being used as the sync

method. The module requires no settings.

Connections, Power Consumption, Width, Weight

Wordclock out (BNC x4), ~100 mA, 4HP, ~150g.

1.3 Audio I/O modules

1.3.1 AD914 4ch Mic Input

General Description

The AD914 provides 4 remote controlled preamps with 24 bit

resolution and sample rates up to 96k. Preamps are

controlled via Eucon interface or web browser interface via

the TCP/IP network on the FC972 Remote. On-board

switches are used to link the sources to the frame’s audio

busses and to set the device ID.

Connections, Power Consumption, Width, Weight

Analog input (MXLR x4), ~1300mA, 4HP, ~300g.

1.3.2 AD920 4ch Analog Line Input

General Description

The AD920 provides 4 analog inputs with 24 bit resolution

and sample rates up to 96k. All settings are done with on-

board switches including buss linking and analog reference

level.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 111 112

No comments

Euphonix Modular I/O Instruction Manual Page 16